STL Files

All colors are only recommended, settings for printing too. No need to print with supports (any of parts)!

Puller Secure Update

There is a new version of the puller part (motor joint). Some of you are facing with sliding this part on the motor shaft with higher loads. This part is secured with M3 nut and screw (10mm long). Hope you will like it… ❤

DOWNLOAD

PET Bottle strip guide

Guide to clean PET strip running into a nozzle. There si lot of a dust, wich will completelly baked up your nozzle and filament cant be pulling out no more! Watch the

assembly video link

DOWNLOAD: https://cults3d.com/en/3d-model/tool/pet-bottle-strip-guide

Bottle cutter:

For all of you that you will find the holes are too small for inserting blade:

Flashlit123: “I scaled it uniformly along the X axis 125% so I could put a utility knife blade in it.”

https://cults3d.com/en/3d-model/tool/bottle-cutter-ondrej-sraitr

Platform Legs

Color: BLACK

Print four of these. You can use PLA. Recomended temperature 230 °C, at least 50% infill. There is nothing special to do. Watch how to assemble this part: https://youtu.be/NHJ8oDz4Hp4

Motor Joint

Color: BLACK

Use PLA with at least four perimetres ( or 100% infill). There is lot of torque and the motor joint could be easily damaged when your filaments stuck in the nozzle. Allways control your nozzle temperature. You can print a new one in case of damage, nothing to worry about. Watch video tutorial, how to assembly this part: https://youtu.be/4Xo5uQt0PYI

Motor Mount (back)

Color: BLACK

Simple 12V dc motor holder. It’s designed to hold the motor tightly. Use PLA, 230 °C. It’s better to use washers before mouting. Watch video tutorial, how to assembly this part: https://youtu.be/4Xo5uQt0PYI

Motor Mount (front)

Color: BLACK

Simple 12V dc motor holder. It’s designed to hold the motor tightly. Use PLA, 230 °C. It’s better to use washers before mouting. Watch video tutorial, how to assembly this part: https://youtu.be/4Xo5uQt0PYI

PWM Button

Color: BLACK

Button for PWM controller. Use PLA, squeeze the PWM regulator rod with pliers before mounting.

Spool (front)

Color: WHITE

Use PLA 230°C. For mouting please use four M3 screws. Watch video tutorial, how to assembly this part: https://youtu.be/4Xo5uQt0PYI

Spool (main body)

Color: WHITE

Use PLA 230°C. For mouting please use four M3 screws. Watch video tutorial, how to assembly this part: https://youtu.be/4Xo5uQt0PYI

Color: WHITE

Switch and PWM regulator

Simple design for Spool speed regulation with switch. Watch video tutorial how to assembly this part: https://youtu.be/yW8Jx6hTvwA

Main Switch

Color: WHITE

Simple design for main switch. Watch video tutorial how to assembly this part: https://youtu.be/2QoaMMBuPPA

Thermometer

Color: WHITE

Use PLA. Watch video tutorial how to assembly this part: https://youtu.be/DnxgBxX3cyc

PLEASE AD ONE LIKE ON THE DESIGN, it helps me SOOOOOOO MUCH!!!! ❤

DOWNLOAD LINK